Slicer Discord
Keychron K6 Ipad mount – 3D-Druckmodell von Thingiverse Thingiverse

Keychron K6 Ipad mount

von schmiddim
4 Downloads
3 Likes
0 Makes
Zum Modell
Mount your Ipad to the Keychron K6.The adapters are standing on the ground for more stability. Angle of the keyboard is a little steeper with this setup. Should work with all newer iPads.

# Hardware
- [Keyboard](https://www.amazon.de/Keychron-USB-Kabelgebundene-68-Tasten-Kompakt-RGB-LED-Hintergrundbeleuchtung-N-Key-Rollover-Aluminiumrahmen/dp/B09FF88L5R?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2WBUVMYK8OABO&keywords=keychron+k6&qid=1642240538&sprefix=keychron+k6,aps,82&sr=8-3&linkCode=sl1&tag=unerklamrande-21&linkId=25475225baa467fc28e40760db851428&language=de_DE&ref_=as_li_ss_tl)
- [Ipad](https://www.amazon.de/Keychron-USB-Kabelgebundene-68-Tasten-Kompakt-RGB-LED-Hintergrundbeleuchtung-N-Key-Rollover-Aluminiumrahmen/dp/B09FF88L5R?__mk_de_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2WBUVMYK8OABO&keywords=keychron+k6&qid=1642240538&sprefix=keychron+k6,aps,82&sr=8-3&linkCode=sl1&tag=unerklamrande-21&linkId=25475225baa467fc28e40760db851428&language=de_DE&ref_=as_li_ss_tl)
- [Ipad
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

schmiddim veröffentlicht auch auf

7 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen