KeyCraft Pro - QMK Macropad

Key Craft Pro is a new DIY friendly QMK Macropad with two EC11 Rotary Encoders and an SSD1306 128x64 Oled display with 12 Cherry MX Keys. It also adds a small hole for the reset button in the front. This helps with flashing firmware often as you don't need to roll it over every time. Currently using it on my desk with my Simple stand: https://makerworld.com/en/models/410458 Printing Instructions: Layer Height: 0.2mm Material: PLA Supports: No Rafts: No Brim: No Software: QMK Firmware: https://qmk.fm/ Hardware: EC11 Rotary encoders with push button - x 2 - Aliexpress Arduino Pro Micro (AtMega32U4) - x 1 - Aliexpress I2C SSD1306 128x64 OLED display - x 1 - <a target="_blank" href="https://www.aliexpress.us/item/3256805755593477.html?spm=a2g0o.productlist.main.29.29f9435cwyPOmH&algo_pvid=959cb1b4-b0