kid goku hueforge

Project: real_2.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA 3dhojor matte black Transmission Distance: 0.6 PLA overture mattel light gray Transmission Distance: 0.9 PLA sunlu matte orange Transmission Distance: 3.9 PLA overture matte yellow Transmission Distance: 3.9 PLA sunlu matte blue Transmission Distance: 1.5 PLA esun matte marine blue Transmission Distance: 1.1 PLA sunlu matte red Transmission Distance: 3 PLA sunlu matte white Transmission Distance: 4.7 PLA polyterra matte red Transmission Distance: 2.3This print uses 9 unique filamentsSwap Instructions: Start with matte black At layer #8 (0.72mm) swap to mattel light gray At layer #10 (0.88mm) swap to matte orange At layer #16 (1.36mm) swap to matte yellow At layer #18 (1.52mm) swap to matte blue At layer #20 (1.68mm) swap to matt