Kirby HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm #000000 IMAGE #000000 Transmission Distance: 1 #a92a30 PLA+ IIID Max Candy Red Transmission Distance: 5 #ee465c PLA Sunlu Matte Red Transmission Distance: 3 #e4bdd0 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 #eac322 PLA+ IIID Max Yellow Transmission Distance: 5 #ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5This print uses 6 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!Swap Instructions: Start with #000000 At layer #10 (0.88mm) swap to Candy Red At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to Sakura Pink At layer #19 (1.6mm) swap to Yellow At