kissing hueforge

kissing hueforge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 139.28x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Blue Gray At layer #9 (0.8mm) swap to White for the rest.