Kitten bookmark - HueForge print

Some cute kittens to help keep your place. Measures 150mm x 50mm (approx. 6" x 2"). The included 3MF file will have the colour swaps already set up. Alternatively, use the STL and set up your own filament swaps and settings as per the instructions below. If you need to resize this print, change only X and Y dimensions. Altering the Z height will mess up the layer colour swaps. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 50x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 1.5mm and the Actual Depth is 1.4mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 2.7 PLA BambuLab Basic Brown Transmission Distance: 1.2 PLA BambuLab Basic Jade White Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.44mm) swap to Blue Gray At layer #14 (0.68mm) swap to Brown At layer #18