Kitten - HueForge

Cat on the bed - HueForgehttps://makerworld.com/en/models/446643#profileId-353149 Kitten - HueForge Can be rescaled just remember not to change the Z axis. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used:PLA+ Sunlu Black Transmission Distance: 0.6PLA+ Sunlu Grey Transmission Distance: 2PLA+ Sunlu Silver Transmission Distance: 2PLA+ Sunlu White Transmission Distance: 5Swap Instructions:Start with BlackAt layer #10 (0.88mm) swap to GreyAt layer #15 (1.28mm) swap to SilverAt layer #21 (1.76mm) swap to White for the rest.Thank you!