Klendathu+Hueforge

Klendathu/JP Mashup Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 226x226mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm Filaments Used:PLA BambuLab Basi Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 3.6 PLA BambuLab Basic Yellow Transmission Distance: 6.4 PLA BambuLab Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #6 (0.56mm) swap to RedAt layer #12 (1.04mm) swap to YellowAt layer #18 (1.52mm) swap to White for the rest. You can scale up or down, just remember to uncheck universal scale.I print 295 x 295 on H2D and226 x 226 on X1CNo Prime Tower