KLR 650 Blinker Stalk Delete Kit

Tired of those bouncy, broken rubber OEM stalks on your turn signals?
These adapter plates remove them from the equation and offer the ability to direct-mount your turn signals to the upper fairing or the rear rack, significantly reducing the chances of damage in a drop!

You will need to purchase a longer self-tapping screw than the OEM, by approximately 7mm, but otherwise these drop right in!

We recommend printing from PETG or painted TPU to prevent degradation from UV over the years.

Installation instructions:
1) Completely remove your windshield and upper fairing (if replacing front turn signals). Take care to unclip the turn signal connectors and headlight plugs.
2) Remove the M4 x 0.7 screw from the inside of the stalk backing plate using a JIS #2.
3) Carefully pry the steel plate out of the rubber. Discard components.
4) Squeeze and remove the rubber stalk and turn signal from the upper fairing.
5) Remove the self-tapping bolt from inside the rubber stalk using a