Thingiverse
Knife Display Case
par abulimov
13
Téléchargements
29
Likes
0
Makes
## Laser-cut knife display case
Can display 6 knives or any objects that are at least 100mm long, up to 25mm deep and up to 45mm high.
Designed for 4mm material.
I used poplar plywood which was then stained with Medium Oak wood stain and varnished.
Assembly is trivial, no instructions required, but you will need some clamps to hold parts together while glue sets.
DXF units are mm.
Can display 6 knives or any objects that are at least 100mm long, up to 25mm deep and up to 45mm high.
Designed for 4mm material.
I used poplar plywood which was then stained with Medium Oak wood stain and varnished.
Assembly is trivial, no instructions required, but you will need some clamps to hold parts together while glue sets.
DXF units are mm.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
