Thingiverse
Knife display stand (folded)
door tomfrajman
125
Downloads
105
Likes
0
Makes
Special version of my knife display stand that is designed for displaying knives in folded/closed position. There are a lot of different pocket clips so this definitely won´t fit every knife.
You need to print 1x side A + 1x side B (or side B bigger clip holes - the name speaks for itself ... should fit bigger pocket clips) + 4x connecting bar. The bars are friction fit but you can also glue them.
Test printed on Kodama Trinus. (PLA, 0.2mm layer, 20% infill). If the parts from your printer fit loosely -> just scale up the connecting bar to 101%.
If you want to support my work you can send me a tip via Paypal
Or you can buy the print from users who have licensed my design: plavro (eBay), Vede3D (Etsy), BassAvid (Etsy, eBay), Quezadillaprinting (Etsy)
Thank you :-)
You need to print 1x side A + 1x side B (or side B bigger clip holes - the name speaks for itself ... should fit bigger pocket clips) + 4x connecting bar. The bars are friction fit but you can also glue them.
Test printed on Kodama Trinus. (PLA, 0.2mm layer, 20% infill). If the parts from your printer fit loosely -> just scale up the connecting bar to 101%.
If you want to support my work you can send me a tip via Paypal
Or you can buy the print from users who have licensed my design: plavro (eBay), Vede3D (Etsy), BassAvid (Etsy, eBay), Quezadillaprinting (Etsy)
Thank you :-)
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
