MakerWorld

Masks & Helmets

Knight's Helmet

by Haws Family · Masks & Helmets

183 Downloads

80 Likes

49 Makes

A simple Knight's Helmet with flip up visor. It prints on 1 bed with supports. I use a couple nuts and bolts and washers I had lying around to secure them together. *This was made for my 5 year old so size accordingly as you would any helmet. Printed in PLA

Category

Masks & Helmets

Source

MakerWorld

Published

12.11.2025

Updated

30.04.2026

What you need to print this: Advanced Medium confidence

Why?

supports needed · very large print

Single piece Supports required Hardware needed May need scaling or splitting

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 3/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

PLA

Min. bed size

300 mm (Extra large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Knight's Helmet?

Any FDM printer should handle Knight's Helmet just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 300 mm is recommended.

Does Knight's Helmet need supports when printing?

Yes, Knight's Helmet will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Knight's Helmet available in?

Knight's Helmet is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Knight's Helmet free to download?

Yes, Knight's Helmet is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Knight's Helmet

Similar Models

Add to Collection