Kobalt 80V Battery Wall Mount

I needed to print some battery holder wall mounts to tidy up my shop. I found this model and oriented it to print vertically without any supports on all bambu printers. Materials Needed to Mount:For mounting all you need is (2) #8 philips or torx screw, 1" or 1.5" length should be all you need. Be sure not to over tighten or else the PETG will crack. Mounting Orientation: You should be able to mount these either vertically or horizontally. The part is strongest when mounted vertically. Print Profile Notes:Nozzle: Suggest 0.4mm nozzle for precision fitWall Loops: 4 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion. Layer Height: Suggest 0.16 or 0.20mm to maximize strength (0.20mm default)Infill: 20% gyroid (can bump to 25% for more strength)Brim: None on textured build plate. Consider brim for smooth PEI plate. Batch Size: For optimum layer adhesion advise printing one part at a time to keep layers hot (2 parts tops). For large Batches redu