Kobra with Skull

Nettes Hueforge Bild 230x230x2.32 mmPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 230x230mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA+ Esun Bone White Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Silver At layer #13 (1.12mm) swap to Bone White At layer #20 (1.68mm) swap to Jade White for the rest. Viel Spass damit