Kobra X modular toolbox and storage

DESCRIPTION I always like to have some storage with each of my printers where I can place tools and consumables. The top spools limit the placement of a tooltray at the top so I decided to add one to the gantry. As an added bonus it also covers the extrusions. The Tooltray offers the following features: A modularmain tray which clips over the extrusoins. It can be divided in up to 4 compartments; 4 modular compartments for the main tray ranging from 1/4 to full width; An addon tray which offers a total of 12 sizes (1/6 to full and single or double storey) Clip on attachments for cutters and the scraper (if you want to change the side you need to mirror them). The tray adds some weight to the gantry. The amount is very small but it may cause the gantry to descend when the printer is not powered. IMPORTANT: if you plan on using the full print height ensure that any things in the front tray do not protude above the top of the tray as there is only a very small clearance at the top. ASSEMBLY   Assembly is quite simple. Tolerances are tight to ensure a correct fit. PLEASE READ AND FOLLOW THESE INSTRUCTIONS TO AVOID ISSUES An assembly gif is also provided in the photo description above. STEP 1 Move the hotend to the middle of the gantry and clip on the main tray. There is limited space so you will need to slide it in horizontally and then push it down, ensure both sides are partially engaged in the extrusions and then press down to secure it in place. Tolerances may affect the fit. IMPORTANT: VERIFY TO MAKE SURE THE HOTEND CAN MOVE SIDE TO SIDE SMOOTHLY - IF NOT THE TOOLTRAY IS NOT FULLY CLIPPED. STEP 2 Using the screws that came with the printer (3x10 mm) screw in each side of the main tray to the gantry extrusions. STEP 3 Clip on the rear tray STEP 4 Clip on the cutter and scraper holder STEP 5 Select an insert the trays for the main and extra tooltrays 3D PRINTING   IMPORTANT: I upload a print setting files for all my models. The print settings has the parts positioned