Koenigsegg Jesko

I would recomned cleaning the plate before printing or using glue. The spoiler has a hard time staying connected. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x133.33mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Light Gray Transmission Distance: 10 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Light Gray At layer #19 (1.6mm) swap to Jade White for the rest.Part of the HueForge Hypercar SeriesThis is one of many high-performance vehicles I’m recreating as multicolor HueForge prints.Stay tuned for more models in this collection — including supercars, EVs, and icons from motorsport.Feel free to follow me or check my profile for new uploads in the series!