Koi - HueForge Print

Utilising HueForge's 'Colour Pop' setting, this Koi print really stands out - the colours separated beautifully and blended individually within it's own colour profiles. It's a bit of a long print, and it's a lot of white - but I think it's absolutely worth it! The 3MF will have everything loaded in including the filament swaps for Bambu Studio. If you're not using Bambu Studio, download the STL and use the following instructions: Print Instructions: Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mm Filaments Used:PLA+ Overture Dark Blue Transmission Distance: 1.8PLA META Sunlu Teal Transmission Distance: 5.4PLA Kingroon White Transmission Distance: 8PLA BambuLab Tough Vermilion Red Transmission Distance: 3PLA CC3D Lemon Yellow Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5Swap Instructions:Start with Dark BlueAt layer #6 (0.4mm) swap to TealAt layer #15 (0.76mm) swap to WhiteAt layer #36 (1.6mm) swap to Vermilion RedAt layer