Kombucha bottle dryer

I designed this so that I could thoroughly dry bottles after I've cleaned and rinsed them.

The stand can be used by itself (without any fan) and It'll hold five smaller swing-top bottles (IKEA type, 0.5L) or up to 4 bottles of 1.2L or so volume. The stand has cylindrical rare earth magnets of 8mm in diameter by 3mm in height. They couple to the same type of magnets placed under the cover of the air manifold. The magnets should be glued in place.

The coupler to flat fans is not very efficient. There is quite a bit of reflected air coming out of the back of the fan. My guess is that I did not design properly the fan coupler for the type of fan I used. The fan is a regular 120mmx120mm computer fan. I also wanted to keep the fan and electrical connections away from any liquids that may come out of the bottles.

Printing of all the parts took a long time.Print at your own risk and expense.

Individual output port can be closed manually, if you have only one or a few bottles to dr