Thingiverse
Korg nanoKEY Studio Replacement Keycap
di Shiro_visual
3
Download
5
Likes
0
Makes
I made this replacement keycap for the Korg nanoKEY Studio MIDI keyboard because I couldn’t find one online. It works for both white and black keys (they’re the same shape on this controller).
I printed it on a Bambu Lab X1C using PLA, and it took around 14 minutes.
No supports needed, at least on my setup — but if you're worried, feel free to enable them just in case.
The STL is already oriented for printing. You can snap it in place or add a bit of glue if needed.
I’ve tested it on my own nanoKEY Studio and it works fine, but I’m still open to improving it — feel free to let me know if you run into any issues!
🛠️ Print Settings
Material: PLA (tested), but ABS, PETG, etc. should also work
Layer Height: 0.2mm
Infill: 30%
Supports: ❌ Not required
Brim/Raft: Optional, depending on your printer
I printed it on a Bambu Lab X1C using PLA, and it took around 14 minutes.
No supports needed, at least on my setup — but if you're worried, feel free to enable them just in case.
The STL is already oriented for printing. You can snap it in place or add a bit of glue if needed.
I’ve tested it on my own nanoKEY Studio and it works fine, but I’m still open to improving it — feel free to let me know if you run into any issues!
🛠️ Print Settings
Material: PLA (tested), but ABS, PETG, etc. should also work
Layer Height: 0.2mm
Infill: 30%
Supports: ❌ Not required
Brim/Raft: Optional, depending on your printer
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
