Kossel manual bed-leveling system

A system to manually adjust the bed. It was originally designed for the Anycubic Kossel Plus.
You can use it to manualy fine-tuning the layer height at three points around the bed. I use it for a few weeks now and find it a relief to use. Having nice first layers since i mounted it without any trouble. You can use it besides your normal bed-leveling routines.

You lose some build-height (10 - 15 mm). The build-diameter is almost unaffected, while the system still keeps the bed firmly in place.

It consists of 4 printed parts. with the slider-A part you have the choice of a version that works with a brass insert (M4, 5mm high and 6mm diameter) and one where you can screw the thread yourself (also M4).
To make it as sturdy as possible there is no extra tolerance between the sliding-parts of slider-A and B. You probably has to file it a little down until it slides without wobble.
After mounting the three clamps you can use the horizontal screws/bolts to secure the bed. It sits li