KPop Demon Hunters - Poster

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon: Or Subscribe for a commercial License Directly in Maker World:   MembershipC3D Commercial Membership - Authorized Merchant   This poster was requested by my girlfriend and I had to oblige! It turned out absolutely lovely. The pictures do not showcase it as well but it has an its own purple frame.  IMPORTANT: When the print pauses automatically almost at the end of the pink color, swap the Black roll with White and the Purple roll with Yellow - For more information please read the explanation after the description.   USE A LIGHTER! - a quick pass with a torch on the printed parts will get rid of the inevitable stringing that comes with this type of models.   Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Jayo Black Transmission Distance: 0.3 / Amazon PLA BambuLab Indigo Purple Transmission Distance: 0.8 PLA KINGROON Sky Blue Transmission Distance: 2.6 / Amazon PLA Jayo Pink HS Transmission Distance: 4.8 / Amazon PLA Jayo Matte White Transmission Distance: 4.2 / Amazon PLA EryOne Mango Yellow Transmission Distance: 4.8 / Amazon Color Pallete:   Swap Instructions: Start with Black     At layer #14 (1.2mm) swap to Indigo Purple     At layer #19 (1.6mm) swap to Sky Blue     At layer #23 (1.92mm) swap to Pink HS     At layer #33 (2.72mm) swap to Matte White      At layer #40 (3.28mm) swap to Mango Yellow for the rest.