Kratos hueforge

Remember if you sant to scale, do it only with x and y axis, z must be the same as original.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA BambuLab Matte Ivory White Transmission Distance: 4Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Gray At layer #12 (1.04mm) s