Kratos Hueforge picture

Project: kratos v2.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 84.21x112.07mm in size You may print at higher layer heights below the Base Thickness of 0.48mm The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #9b9ea0 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Ash Gray At layer #14 (1.2mm) swap to Jade White At layer #22 (1.84mm) swap to Red for the rest.