Krieg the Psycho Buzz Axe

This is a replica of Krieg's buzz axe from Borderlands 2 that I modelled myself from scratch.

The handle with a hole in it is intended so the printed axe can be used as a keychain.

The .stls are for a size of about the same as the real axe would be. I successfully printed it at 15% scale with .12 resolution. The handle snaps tightly into the blade holder and the blade can be slid in and held in place either by the pin or by 1.75 mm when at 15% scale. I recommend printing the blade holder with the handle portion facing upwards to make it easier to clean the supports off.

At full size, the handle connector slot is .5in by 1.250in. I designed so that at full scale the handle could be replaced with pieces of laser cut wood stacked to create the handle, but I have not had an opportunity to make this yet.

Let me know if you have issues with it and please share if you make it!