Kryptex als Geocache
von HGW
1.7k
Downloads
1.3k
Likes
15
Makes
Diese Kryptex dient mir als Behälter fürs Geocachen.
Der Kryptex besteht aus fünf Ringen mit jeweils 16 möglichen Zahlenkombinationen. Die Zahlen sind frei wählbar!
Der Ring und Ring_innen werden 5x gebraucht. Nach dem Einstellen der Zahlenkombination werden diese auf die Ringhülse geschoben und die Endkappe wird mit der Hülse verklebt.
Aussenmasse: L=164mm, Durchmesser=70mm
nutzbares Innenvolumen: L=151mm, Durchmesser=38mm
Translation from user s_mohr (thx):
I use this cryptex as a geocaching container.
The cryptex has 5 rings with 16 possible combinations. The numbers are freely selectable!
You need to print 5x Ring.STL and 5x Ring_innen.STL
After setting the combination, push the rings onto the sleeve and glue the end cap (endkappe.STL) onto the tube.
Outside dimensions: 164mm long, 70mm diameter
Internal usable volume: 151mm long, 38mm diameter
time to print ~ 20h
2014-05-01: added "Dose_short" for shorter time to pr
Der Kryptex besteht aus fünf Ringen mit jeweils 16 möglichen Zahlenkombinationen. Die Zahlen sind frei wählbar!
Der Ring und Ring_innen werden 5x gebraucht. Nach dem Einstellen der Zahlenkombination werden diese auf die Ringhülse geschoben und die Endkappe wird mit der Hülse verklebt.
Aussenmasse: L=164mm, Durchmesser=70mm
nutzbares Innenvolumen: L=151mm, Durchmesser=38mm
Translation from user s_mohr (thx):
I use this cryptex as a geocaching container.
The cryptex has 5 rings with 16 possible combinations. The numbers are freely selectable!
You need to print 5x Ring.STL and 5x Ring_innen.STL
After setting the combination, push the rings onto the sleeve and glue the end cap (endkappe.STL) onto the tube.
Outside dimensions: 164mm long, 70mm diameter
Internal usable volume: 151mm long, 38mm diameter
time to print ~ 20h
2014-05-01: added "Dose_short" for shorter time to pr
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!