Thingiverse

KTM plug for bicycle handle

by GAFL

0 Downloads

0 Likes

0 Makes

The two plugs are for a KTM mountain bike for their handles (left / right). Have lost both quite quickly and guess someone else will have the same problem.

In my case the plugs were originally oragne, that's why I printed you in an oragne PETG.

I added three small strips to the lateral surface that make the diameter slightly larger than the tube the plug is inserted into. If the plug does not fit you, simply remove the strips with a knife.

There are the handle:
https://www.amazon.de/KTM-Fahrrad-absorbiert-waschbar-wahlweise/dp/B08CXN91CK?th=1

bicycle bicycle handle bike cap Fahrrad Fahrradgriff Stpsel Griff haltegriff handelbar Handgriff handle ktm KTM Fahrradgriff little fellow Mountenbike myroon pegs Pfropfen pipe plug cap plug

Source

Thingiverse

What you need to print this: Beginner Low confidence

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format