Label_Sticker_Holder

This Item was printed in: REAL-Filament's Black PLA ø2.85.

Slicer: Ultimaker CURA 3.2.0.

(This might also work for other sorts of tape.)

This Thing is designed to fit on 4545 Aluminium Extrusion Profiles, See Wall_Mount_For_Single_Piece_4545_Aluminium_Extrusion_profile

Print Settings
Quality
Layer height: 0.20mm

Shell
Wall Thickness: 1.8mm
Top/Bottom Thickness: 1.8mm

Infill
Infill Density: 20%
Infill Pattern: Grid.
Infill Overlap Percentage: 20%
Skin Overlap Percentage: 20%

Speed
Print Speed: 70 mm/s.
Travel Speed: 120 mm/s.

Support
Enable Support: No.

Build plate Adhesion
Build plate adhesion type: None.