Laboratory stand lamp – 3D printable model from MakerWorld

MakerWorld

Electronics

Laboratory stand lamp

by Hautumanteika · Electronics

26 Downloads

42 Likes

3 Makes

Go to Model

Over top lamp for DIN railing ____________________________________________________________________________________________________________ Attention! This lamp uses electricity, don't lick bare contacts and DO NOT apply dangerous voltages ____________________________________________________________________________________________________________ Hey fellow makers! I wanted to share my firs try on making lamp for my Laboratory stand - somewhat articulated lamp to light only working area with abilty to be turned away and off without touching it too much. Lamp in my case uses 5V from phone charger, you can freely use 12 and 24V versions Total cost of the lamp result's in around ~1-2$ BOMHardwareAmountM2x6 screw/bolt2 pcsM2.5x6 or M2.5x10 screw/bolt4 pcsM4x2

electronics LED strip DIY lamp Lamp Arduino light Light Switch articulated DIN din laboratory electricity cyberpunk USB usbc rack Stand

Category

Electronics

Source

MakerWorld

Published

29.05.2025

Updated

31.05.2026

What you need to print this: Beginner Low confidence

Why?

print-in-place design · large print

Print-in-place Hardware needed

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Polycarbonate

Min. bed size

200 mm (Large)

Post-processing

Hardware

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Laboratory stand lamp?

Any FDM printer should handle Laboratory stand lamp just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

Does Laboratory stand lamp need supports when printing?

Nope — Laboratory stand lamp is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

What file format is Laboratory stand lamp available in?

Laboratory stand lamp is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Laboratory stand lamp free to download?

Yes, Laboratory stand lamp is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL