Labrador Retriever

This print is of a Labrador Retriever, a beloved pet for many. Done in 4 colors for ease of print. Frame is from canadian gamer slime and square. If you like this design or any others please consider giving a like and follow and as always boosts are much appreciated. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 3.2mm and the Actual Depth is 3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #20 (1.68mm) swap to Blue Gray At layer #23 (1.92mm) swap to Gray At layer #27 (2.24mm) swap to Jade White for the rest.