MakerWorld

Animals

Labrador Sitting

by Graham6541 · Animals

4 Downloads

2 Likes

1 Makes

This is a model of my 3 year old Labrador Milo. I have printed in PLA with supports.Quick print in around 1.5 hours on my H2S.I have added a multicolour print but not tried this myself so it would be interesting to see how this would look.

Category

Animals

Source

MakerWorld

Published

02.02.2026

Updated

10.05.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed · 2 colors

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Colors

2 (AMS/MMU recommended)

Est. print time

1.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Labrador Sitting need supports when printing?

Yes, Labrador Sitting will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Labrador Sitting?

According to the design notes, Labrador Sitting takes approximately 1.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Labrador Sitting available in?

Labrador Sitting is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Labrador Sitting free to download?

Yes, Labrador Sitting is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Labrador Sitting

Similar Models

Add to Collection