Labyrinth Pinball Launch Rails

Launch rails for the Labyrinth pinball from Barrels of Fun. These assist in having the ball pass the wireform edges smoother on launch. I was having issues with the ball not traveling past the worm skillshot, and with these installed I'm able to do a full plunge around the playfield and land at the flippers. I printed these on an A1 Mini, so did have to trim down the model to fit the bed. These are the full length rails so trim as needed. To install:Remove left plastic (one screw and nut) on left railRemove auto shooter on underside of playfield (4 wood screws)For left rails: remove the 3 wood screws going through the playfield into the rail. Align left rail print to match to screw positions and re-assemble.For right rail: remove bottom 2 wood screws going through playfield into the rail. Slide the right rail print under the rail and align.Both left and right rail prints should be on the inside of the wireform edge to make a smooth transition into the wireform.