Lack Enclosure Leg Bracket V1

This is the old design. Updated V2 design can be found at:
https://www.thingiverse.com/thing:4418614

I designed this bracket in Fusion 360 to address a wobbling issue I was having with my Lack Enclosure V2. They are an extreme overkill solution, but they're light weight and I think they look nice.

I designed them to have a high stiffness to weight ratio. It was originally designed to be printed in PLA due to its inherent stiffness, but I've found even PETG comes out surprisingly stiff with this material arrangement.

It's still a work in progress. I want to move the screw holes out from the main structure a bit for ease of access to the screws and chamfer a few edges to allow better printability without supports. I also want to add another set of screw holes to the 90 degree corner to allow for more versatility with the design and open it up to be used for other things (shelves and such).

The screw holes are 3.8 mm as this was the best fit for the screws I had on hand.