Thingiverse
ladder foot
par Merandey
4
Téléchargements
7
Likes
0
Makes
- A foot for my old aluminium ladder.
- The feed of my aluminium ladder are in bad condition, so I use 0.6mm tolerance.
- For the original foot(20X35mm) I recommend a scale to 98%.
- This thing needs a rubber like material to provides sufficient traction on plan faces.
My settings with Flexfill 98A* to print it in size(Prusa clone; bowden Extruder):
LH: 0.3mm(0.3mm nozzle)
EM: 1.08
infill: 100%
speed: 30/15 mm/s
Temp.: 215° C
bed: 60° C
cooling: 95%
- The feed of my aluminium ladder are in bad condition, so I use 0.6mm tolerance.
- For the original foot(20X35mm) I recommend a scale to 98%.
- This thing needs a rubber like material to provides sufficient traction on plan faces.
My settings with Flexfill 98A* to print it in size(Prusa clone; bowden Extruder):
LH: 0.3mm(0.3mm nozzle)
EM: 1.08
infill: 100%
speed: 30/15 mm/s
Temp.: 215° C
bed: 60° C
cooling: 95%
Merandey publie également sur
28 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
