Lamp #1 - Bullet Lamp

This is a simple lamp, easy to print in 2 pieces, the outer Shell and an inner shade. 210 mm Height - 85 mm width It was made for an E14 fassung(socket) with a threaded insert to screw in the bulb socket . The bulb is a low wattage soft white. The filaments used were an ERYONE Matte PLA Filament black and Prusament Vanilla White for the shade. No supports are required during printing. The electrical parts are listed cheaply available. The electrical parts are pictured and cheaply available.The fassung-lamp socket ( e14-28 mm): https://www.amazon.de/dp/B097K4YNL9The electrical cable and switch: https://www.amazon.de/dp/B002DAOX58The E14 Bulb used here: https://www.amazon.de/dp/B0B5MPL9MX The slicer settings for the outer shell: .20 mm Standard and Generic PLA(All standard settings and speeds)Filament: Eryone Matte Black PLA The slicer settings for the Bullet Shade: .16 mm High Quality and Generic PLAInfill % - 30 , GyroidWall Loops - 8Top Shell - 8Bottom Shell - 6Outer Wall Speed - 60 m