Lamp Living room E27

Decorative light to put on a sideboard.

Hight of lamp shade about 255mm. Width about 150mm.
(Could print it on my Ender 3S1)

Holder fits a regular (40mm wide) E27 bulb socket.
Due to the heat, I only recommend LED bulbs.

I printed the shade, using transparent PETG.
So using multicolor bulbs might give U a nice effect.

No support needed. Foot needs to be printed 3 times.
I set the fillrate 25%.
Wall thickness of shade outside is 0,8mm. So a0,4mm nozzle is recommended.

I just sticked the socket into the holder. Will make swapping the bulb easier (just pull the socket out).
But glueing it in will work too. Shade is wide enough to reach in for replacing the bulb (Unplug lamb first).

For wiring up the socket and lamp, contact a qualified electrician!

Other things needed: 1 E27 socket with cable and plug, 6 wood screws flathead 3mm*12-20mm.

UPDATE: Added Halter Leuchtmittel V2. Better ventilation for socket. Had no issues with failing bulbs due to temperature, or any material melti