Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / Decor / Lampshade - Diamond Big
Lampshade - Diamond Big – 3D printable model from MakerWorld MakerWorld
Decor

Lampshade - Diamond Big

by JANBERRY DESIGN · Decor
356 Downloads
184 Likes
161 Makes
Go to Model
Lampenschirm – Diamond Big Lamp shade with diamond pattern. Print in Spiral Vase Mode0.2 Layer height0.6 Layer thicknessTime ~ 2.25 hours The hole in the file is for a typical 40 mm threat (E27 light bulb). You can adjust the whole size to whatever size you need. Go under objects and scale the generic cylinder to whatever size you need. The lamp shade itself can be scaled aswell. Please be careful when removing it from the print bed. The shade only has a whallthickness of 0,6 mm. Especially the first layer after the 7 bottom layers is fragile. I would recommend to go with a scraper under the bottom layer. Tripod Stand If you prefer not to hang the lamp as a pendant, you can use the tripod stand instead. It features a 41 mm hole compatible with standard E27 fittings. The tripod is also compatible with my other lampshades. Approximate print time: 6 hours Boost Me Check my other Work aswell.
Category
Decor
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Medium confidence
Why?
no supports
Support-free Single piece
Supports 0/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
Min. bed size
50 mm (Small)
Est. print time
25 h
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Lampshade - Diamond Big?
Any FDM printer should handle Lampshade - Diamond Big just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.
Does Lampshade - Diamond Big need supports when printing?
No supports needed for Lampshade - Diamond Big — it's designed to print clean off the bed.
How long does it take to print Lampshade - Diamond Big?
According to the design notes, Lampshade - Diamond Big takes approximately 25 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.
What file format is Lampshade - Diamond Big available in?
Lampshade - Diamond Big is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Lampshade - Diamond Big free to download?
Yes, Lampshade - Diamond Big is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
MOORPH 2
MOORPH 2
by Moorph
↓ 1 ♥ 3
Lamp Shade 0108
Lamp Shade 0108
by xSteve
↓ 408 ♥ 89
Lamp Shade 0103
Lamp Shade 0103
by xSteve
↓ 365 ♥ 77
Honeycomb Lamp Shade
Honeycomb Lamp Shade
by DaBoy
↓ 234 ♥ 198
Lampshade for E14 socket
Lampshade for E14 socket
by CsabaP
↓ 182 ♥ 136
Lamp Shade 0109
Lamp Shade 0109
by xSteve
↓ 99 ♥ 19
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection