Lampshade, Work lamp, Table lamp

原来的台灯灯罩太矮了 有的角度无法完全遮住灯泡 会晃眼睛制作了一个更加高一些的灯罩 避免直射灯光晃眼睛卡口的外直径是62mm 如果与你的灯不适合 可以尝试等比例缩放调整大小建议使用PETG材料制作 防止灯泡高温导致变形灯罩部分可以设置一层壁厚灯罩卡扣部分使用修改器调整为2层壁厚如果想要灯罩不透光 可以在内侧贴上铝箔胶带打印不需要支撑 The original lampshade is too short. At some angles, it cannot completely cover the bulb and will dazzle the eyes.A taller lampshade was made to avoid direct light dazzling the eyes.The outer diameter of the bayonet is 62mm. If it is not suitable for your lamp, you can try to adjust the size in proportion.It is recommended to use PETG material to prevent deformation caused by high temperature of the bulb.The lampshade part can be set to one layer of wall thickness.The lampshade buckle part is adjusted to 2 layers of wall thickness using the modifier.If you want the lampshade to be opaque, you can stick aluminum foil tape on the inside.Printing does not require support