Landscape [RedSun] HueForge

My own AI image. Then used HueForge v0.8.1 to create the model. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.I made two version size model/profile, the first is 200x200 and the second for A1Mini 175x175. The color change settings are identical. Do not adjust the height (Z) in your slicer! The layers would not be correct. You can only modify the X and Y dimensions. You may print at higher layer heights below the Min Depth of 0.56mm. The Max Depth is 2.2mm and the Actual Depth is 2.2mm It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support. Filaments Used: PLA Elegoo + Black Transmission Distance: 0.3 PLA Elegoo + White Transmission Distance: 7 PLA Elegoo + Red Transmission Distance: 3.5This print uses 3 unique filaments Swap Instructions: Start with Black At layer #9 (0.8mm) swap to White At layer #16 (1.36mm) swap to Black At layer #17 (1.44mm) swa