Laptop Cooling Pad

This cooling pad is designed to fit a 13 in MacBook Air but should work with other small laptops. I designed it to be as thin and light as possible while still providing adequate cooling capabilities. The fan I used is a thin 120mm fan linked below that I soldered a USB cable to. If you don't want to solder, I've also linked some USB to 4 pin connectors that will accomplish the same thing.

As designed, it will require a large printer with a build plate of at least 300mm. It is split into 2 pieces that are made to be glued together once printed.

Thin Cooling Fan: https://www.amazon.com/dp/B0CHVCYZV3?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

USB to 4-Pin Connector: https://www.amazon.com/3-Pin-Sleeved-Adapter-Connector-USB-3Pin/dp/B07JW73KVR/ref=sr_1_5?crid=2TL1LC54WTWMJ&dib=eyJ2IjoiMSJ9.YW1XnMZKYh7oQxLrVr1KLGK5ngN3Sr3Su1TgzHYdzuI1C45iof7HGQn-z902kfBXp9GfYKGU2xtUqE35aXeL81ZOFDwcyCMVs0xUaEpKR1i--Lo54Vme2hmy_BuNooSwGWYwJAmk_rIU5c1fiKBM3fs1B1r6zqQey7FJH7zqkxYAe07WN-mo3ucNCBTYoBr0SlPlOjbFmb