MakerWorld

Garden

Large octagon planter

by Chimeron · Garden

46 Downloads

18 Likes

20 Makes

A large octagonal plant pot. It measures about 23 cm tall and 21 cm across. It has 2 drainage holes at the bottom to prevent overwatering. I printed it at 5% gyroid infill, which uses about 500g of filament and took just over 11 hours. It prints well without supports.

Category

Garden

Source

MakerWorld

Published

17.05.2025

Updated

30.04.2026

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA

Est. print time

11 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Large octagon planter need supports when printing?

No supports needed for Large octagon planter — it's designed to print clean off the bed.

How long does it take to print Large octagon planter?

According to the design notes, Large octagon planter takes approximately 11 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Large octagon planter available in?

Large octagon planter is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Large octagon planter free to download?

Yes, Large octagon planter is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Large octagon planter

Similar Models

Add to Collection