Laser Cut Paint Caddy

Lasercut paint caddy based on a design I saw online (not on Thingiverse). I sized mine to fit my 2oz airbrush paints. Designed for 1/8" plywood. Back piece is too large for my laser cutter so I split it in two. I'm using K40 Whisperer so my paths are colored red. Adjust the line widths/colors as necessary for your laser cutter.

This design is still in progress:

In my case I wanted to make an acrylic cover (laser cut and bent), but I want to upgrade my ventilation system before doing so. I included a two piece plywood cover with finger joints, but you'll need to figure out the hinges for it.

For the carrying strap I used some leftover leather that I had lying around.The screw holes for the carrying strap is a 6mm diameter cut. It's actually a little small for the 1/4" bolts I had around, but it still ended up working out okay.

My drawer is a little undersized as I accidentally took the faces from my 1/4" design. I'll add those SVGs in a bit.