Laser Cut Squares Snapmaker 2.0 A250 G-Code

G-Code for use on Snapmaker 2.0 A250. Used to cut different squares at different settings. Left to right columns: 4 pass, 5 pass, 6 pass, 7 pass. Top four rows, 120mm/min. Middle rows, 110mm/min. Bottom rows, 100mm/min. Each block of four rows goes - top; .4mm depth, .5mm depth, .6mm dept, bottom .7mm depth.

Use the Cut Test Square3.svg._20200123125510008.nc file as your g-code. Be sure to set work origin and run boundary.

Material was 3mm birch plywood. 8"x8" - Though xAxis probably only needs 3".