Laser Ventilation Funnel with Filter

When bought the laser I did not expect that much smoke and fumes. Somewhat ok for wood, but PLA for example I do not want to inhale. So the laser had to move into the garage and get a ventilation system. The top cover is to be developed. I noticed when parts get cut, small pieces fall through the honeycomb mesh. The filter inlay is supposed to catch bigger stuff, depending on the filter mesh size.I used this mesh: https://de.aliexpress.com/item/1005005757971635.html?spm=a2g0o.order_list.order_list_main.5.54b71802kXOGd8&gatewayAdapt=glo2deu#nav-reviewThe mesh I cut out with scissors and fixed with hot glue. The filter inlay and the dust collector are magnetic with 3x2mm (diameter x height) disc shaped magnets.Most just fit tightly, some I had to glue in. I like the haptic of both the filter inlay and the dust collector very much.The OSB plates are pretty simple, as my goal was to do all the nasty angles in the 3d print. They are the 12mm type. You just measure the top (360mm) and bottom