Thingiverse
LattePanda Alpha Stand
par nlamprian
5
Téléchargements
6
Likes
0
Makes
A stand to mount the LattePanda Alpha/Delta and its official touch display.
I printed the stand on an SLA printer (excuse the bad state of the stand in the pictures; it was a failed print).
Compared to the stand in the pictures, there are two key differences:
* The display pitch angle was increased from 15 deg to 30 deg
* The holder for the USB hub was removed
Depending on the dimensions of your printer, the stand can be printed as one or two pieces. In the latter case, the two parts are fastened together with M3 screws.
At the bottom of the stand, there are indentations for 8 mm elastic buffers/feet.
I printed the stand on an SLA printer (excuse the bad state of the stand in the pictures; it was a failed print).
Compared to the stand in the pictures, there are two key differences:
* The display pitch angle was increased from 15 deg to 30 deg
* The holder for the USB hub was removed
Depending on the dimensions of your printer, the stand can be printed as one or two pieces. In the latter case, the two parts are fastened together with M3 screws.
At the bottom of the stand, there are indentations for 8 mm elastic buffers/feet.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
