Launcher Red Dot Sight

This is a red dot sight to be used for any launcher with slow moving projectiles that require a high angle of aim like nerf, 37mm, or 26.5mm. It has preset notches at 5 degree increments from 0 to 35 degrees. It fits a Shield RMSC mounting plate because I found a cheap red dot for $60 on amazon with that footprint. I will note that works really well, but this is version one. Version two will reduce the radius, make it more compact and hopefully make the risers much stronger. However, no clue when I get around to finishing that so I am posting this now. The smallest piece, the one that indicates what angle it is set at must fit within the other piece. I have two printers, when I print on one it fits fine but on the other I have to scale it to 98 percent. And sanding pieces with fine grit sandpaper and using the same lubrication you use on your printer rails makes it much smoother. Sanding is definitely needed on the pegs for the red dot mount. Unfortunately, this part needs to be printe