Thingiverse
LC100A Box
von mnunez
8
Downloads
10
Likes
1
Makes
Simple box for my new LC100A ICSH014A capacitance and inductance meter.
I made it using PLA 1.75mm.
Some fine manual adjustments may be required in screw and button holes.
You have to replace the original metal stand-off spacers by printed ones. Also you must use new M3 screws lengthy enough. I had to shorten spacers to 11.2mm and used 30mm long M3 screws that I cut accordingly. You can fit nuts into their holes easily using a screw to force them in.
I provide OpenSCAD sources for your convenience.
Enjoy!
I made it using PLA 1.75mm.
Some fine manual adjustments may be required in screw and button holes.
You have to replace the original metal stand-off spacers by printed ones. Also you must use new M3 screws lengthy enough. I had to shorten spacers to 11.2mm and used 30mm long M3 screws that I cut accordingly. You can fit nuts into their holes easily using a screw to force them in.
I provide OpenSCAD sources for your convenience.
Enjoy!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!