lcd 2004 case for 3d printers

This is a new case model to mount an lcd 2004 including all the required acessories to mount the case in a slot20 or slot30 (both included).
All screws are M3x10 and M3 inset nuts are used to fix all parts, so,these nuts need to be inserted in the 4mm holes, applying some heat with a soldering iron, as usual.
Lately i prefer to use another method which consists of screwing the nut onto a long screw, applying heat to the nut with a kitchen torch and inserting it into the hole.
The union of the lcd2004_case_fix with lcd2004_slot20_fix, forms a joint (hinge) that uses M5x25 screws and locknuts M5 to create enough pressure between the two parts and also to prevent the screws from loosening.
Iit is convenient to use washers on both sides, in both sides.

Lettering is included for those who want it as shown in the photo, to print the front in two or more stages, each one with a different color.