LCD Controller 12864 Enclosure with Voltmeter

This LCD Controller is similar to my other design (https://www.thingiverse.com/thing:2756990) but adds a voltmeter to the project. It also has 'snaps' to interlock bezel to base.

Controller available on Amazon Prime for around $13. Search for "12864 LCD Full Graphic Smart Display Controller". Voltmeter from Banggood.com for under $4. Search for "Geekcreit® 0.28 Inch 2.5V-30V Mini Digital Volt Meter". NOTE: you will have to move the contrast pot on the LCD Controller to the back to make room for the voltmeter. This requires basic soldering skills and tools.

Use a sharp knife to remove the thin film over the holes for the LCD controls. 3mm screws secure the LCD to the bezel. The voltmeter is secured with #2 x 1/4 thread forming screws, or you could use hot glue. The cutout in the back of the base is for the ribbon cables to exit

The example shown has bezel printed in Gun Metal Gray PLA; base in silver; reset button actuator in orange for contrast.