Lean Bearing Bracket

Reduced weight from 868.4g to 351.081g. 59.572% reduction! Reduced mass from 6.693 cubic inches to 2.736 cubic inches. 59.121% reduction! The concept revolves around distributing the load from the arch of the bracket into the base in order to use less material and maintain strength (FOS of at least 1 under all loads). All angles are 45° or better so no support should be needed. (I cant confirm since I lack the software) I have attached a print showing the desired print orientation with estimated support. DESIGN STUDIES ARE INCLUDED IN DOWNLOADABLE FILES!! Design released, gen 2 on the way!