Thingiverse
LED Base for 28mm Miniatures
par DastardlyDnD
4
Téléchargements
2
Likes
0
Makes
Useful for hollowed out campfires or elementals.
Simple to put together with no extra tools or soldering required.
1. Bend the two legs of the LED:
- One goes over the top, into a small hole on the top and bends down inside the base so it will touch the bottom of the battery.
- The other goes in through the large hole so it can touch the top of the battery, then through a small hole on the side so it can fold around the outside.
2. Place a battery into the base. If it doesn't work, flip it over.
Required parts:
- Needs an LED, preferably an orange flickering one if you're doing something fire-related.
- Needs a CR2032 battery.
Simple to put together with no extra tools or soldering required.
1. Bend the two legs of the LED:
- One goes over the top, into a small hole on the top and bends down inside the base so it will touch the bottom of the battery.
- The other goes in through the large hole so it can touch the top of the battery, then through a small hole on the side so it can fold around the outside.
2. Place a battery into the base. If it doesn't work, flip it over.
Required parts:
- Needs an LED, preferably an orange flickering one if you're doing something fire-related.
- Needs a CR2032 battery.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
